Tiemme H28 Dry Floor Insulated Aluminium Heat Transfer Panels 
Click To Enlarge

 

Tiemme H28 Dry Floor Insulated Aluminium Heat Transfer Panels

 

TL    

IDEAL FOR ENGINEERED TIMBER FLOORING, TILE ON COMPRESSED SHEET & PARTICAL BOARD WITH VINYL OR CARPET, WE DO NOT RECOMMEND USEING NATURAL TIMBER ON TOP ON THIS PRODUCT.

The H28 dry radiant system is designed for heating and cooling systems where the use of traditional screeds is not possible.In fact it allows the installation of a low-profile radiant system with reduced thermal inertia and no water-based screed, thus guaranteeing decisively reduced installation times and effort compared to the moretraditional systems.The main element of the system is a moulded panel in sintered expanded polystyrene (EPS) bonded with an aluminium foil, 0.3 mmthick.The panel is provided with castellations for laying pipes having outer diameter of 16 and 17 mm, and with fixed laying spacing of 150 mm.The dimensions in the plan view are 1200x600 mm, total thickness 28mm. The panel is provided with rebates on all four sides to obtain the correct connection of the adjoining panels. Another necessary element is the header panel which is also made of shape moulded EPS and provided with an aluminium foil. The dimensions of the panel in the plan view are 600x300 mm, total thickness 28 mm. Similarly to the previous type, this panel is provided with rebates on all four sides to obtain the correct connection of the adjoining panels. Tiemme offers two distinct systems based on the type of covering of the above described panels. More precisely:

 AT

· Most Popular System 1: covering with a double layer of galvanised steel sheet plates (Generally 2400mm x 1200mm x 1 mm, generally supplied by builder from sheet metal merchant, allow approx $60 per 1mm sheet) on which the floor covering is then installed. The total height of the system (excluded the covering) is 30 mm. Please refer to the stratigraphic layout open the PDF below:

  System 2: covering with a double layer of gypsum fibre panels
on which the floor covering is then installed and Glued this is used with Engineered Timber flooring and you will need to supply this sheeting and check with your Engineered Timber Flooring supplier for the appropiate Glue.
The total height of the system (excluded the covering) is
approximately 50 mm. Open the PDF below for more information.

 

 8641000, Insulated Aluminium Heat Transfer Panel, 1200mm x 600mm x 28mm = .72m2DP

 8641100, Header Panel for layout perimiter ends (Either NORTH SOUTH OR EAST WEST) depending on pattern selected, 600mm x 300mm x 28mm = .18m2

 HP

Brochure Download Link -> Download Brochure

 

Price (each):
8641000, Insul, Alum, Heat Trans Panel, 1200 x 600 x 28.  $66.00 
8641100, Header Panel, 600 x 300 x 28.  $33.00 

Quantity   for 
Tiemme H28 Alum, Insulated System.