Stiebel Eltron WPL 25 and SBS Combi Tank, Hydronic & Domestic HW Packages 
Click To Enlarge

 

Stiebel Eltron WPL 25 and SBS Combi Tank, Hydronic & Domestic HW Packages

 

SI

AVAILABLE NOW, PRICES LISTED AT A DISCOUNT FOR LIMITED PRODUCT LAUNCH PERIOD

 

Pictured above is the new WPL 25 which can be single or thee phase and comes in various hydronic Heating applications

 GO HERE TO UNDERSTAND THE MASSIVE BENIFITS OF HEAT PUMP TECHNOLOGY

                           https://youtu.be/TrTT84086q8


 

HWS

WHEN COMBINED WITH HEAT PUMPS THESE TANKS SUITE SYSTEMS FOR MEDUIM TO LARGE SIZED DWELLINGS, which will perform up to 50% CHEAPER THAN NATURAL GAS & 80% CHEAPER THAN LPG SYSTEMS, WITH EVEN HIGHER PERFORMANCE IF YOU ADD THE SOLAR THERMAL OR WOOD FIRE OPTION.

 

SBS in thermal jacket

 


The SBS cylinders come into their own where space is at a premium, as they are buffer and instantaneous water cylinder in one. This enables the highly effective immersion Stainless Steel coils to improve the hygiene inside the cylinder, the water making up the body of water in the tank is the hydronic water and is heated direct to set temps of approx 60 degrees by heat pumps, this body of water services the hydronic demand of the dwelling and is at approx 300 kpa. and is drawn from the body of the tank to heat the building when the temperature  thermostat calls for heating (when heating is not required its a fast recovery hot water service). The Domestic Hot Water for the dwelling is heated via a Stainless Steel Immersion Coil inside the cylinder in the SBS W models and this water in the coil is at up to 700 kpa, only smaller amounts of DHW need to be kept hot to deliver hot water to the entire house and its heated instantly on demand via the large internal Stainless Steel Immersion Coil. There also is an additional second heating option (other than the heat pump heating the body of water in the cylinder) , this can be obtained by using a SBS W SOL cylinder, this model has an extra heat transfer Stainless Steel Immersion Coil placed into the bottom section of the cylinder which surrounds the base of the DHW coil, this could be heated by environmentally responsible solar energy (eg evacuated tubes) or wood fired heater / cooker with a wet back. This internal additional indirect solar coil inside the cylinder (SBS W SOL) allows an additional renewable energy source to be integrated easily into the system (when the sun is shining or the wood fire is going and reduces the load on the main heat pump unit. That turns these combi cylinders into real power packs for your installation with awesome versatility .

  • Heating water buffer cylinder with integral, instantaneous DHW heating
  • 600 ltr to 1500 ltr to cylinders for domestic and commercial applications
  • Hygienic DHW heating through instantaneous water heater operation
  • Highly effective thermal insulation minimizes heat losses (accessory)

 SBS

BUY UPGRADING TO THE "SBS W SOL" MODELS THE SECOND OPTIONAL IMMERSION COIL CAN PROVIDE A SOLAR THERMAL OR WOOD FIRED OPTION.

NOTE THESE TANKS COME AS A NAKED SHELL THE INSULATION COMES AS A SEPERATE ITEM AND IS WRAPPED AND STRAPPED ON BEFORE INSTALATION. IT NEEDS TO BE ORDERED PRICES BELOW   

NOTE the 230312, DHW Circ Set & Recirc Assembly, is fittings to assist in the installation of a ring main hot water circuit.  (Does not include pumps)

NOTE THIS PRODUCT WILL NEED TO BE ORDERED 12-16 WEEKS before REQUIRED as it is an overseas ORDER and we will require a 10% deposit  

PDF: download

 THIS OUTSTANDING PRODUCT HAS TAKEN EUROPE BY STORM IT NOW AVAILABLE FROM THE ENTER SHOP AS SPECIFIC KITS BASED ON HEAT LOAD REQUIREMENTS IN SINGLE OR THREE PHASE APPLICATIONS. WE CAN QUOTE A SYSTEM FOR YOUR PROJECT, CONTACT US FOR MORE INFORMATION. BELOW IS THE CONTENTS OF A TYPICAL KIT FOR A MEDIUM TO LARGE HOME

Typical Single Phase Package WPL 25 AS &b SBS 601 W 600 litres

 236642 1 x Air|Water heat pump WPL 25 AS                                                       

 233623 1 x Hydraulic connection kit AS-WP 2                                                                     

 233711 1 x Safety temperature controller STB-FB                                                              

 229980 1 x Instantaneous cylinder SBS 601 W                                                                    

 231925 1 x Thermal insulation WDH 601 SBS                                                                      

 238490 1 x Bausatz Umschaltventil für Wärmepumpen-Rücklauf                                   

 233826 1 x Hydraulic module HMS Trend                                                                             

 229336 1 x Internet-Service Gateway ISG web                                                                   

 233602 1 x Compact installation WPKI-HK E                                                                    


 

Price (each):
Single Phase,WPL 25 AS &b SBS 601 W 600 litres.  $21,559.23 
Single Phase,2 x WPL25AS & 1 x SBS W800 two zones.  $33,406.67 
Three Phase,2 x WPL25AC & 1 x SBS W600 two zones.  $33,517.00 
Three Phase,2 x WPL25AC & 1 x SBS W800 two zones.  $33,846.67 
Stiebel Eltron Technician to Commission New Machine and Hand Over.  $605.00 
Air|Water Heat Pump WPL 25 AS 236642.  $13,719.20 
Pair of Straight Connectors WPL 25.  $36.30 
Circulation Pump UP 25/7.5 PCV 235949.  $332.52 
1 SBS 601 W 229980.  $3,673.56 
Thermal Insulation WDH 601 SBS 231925.  $1,154.34 
ISG Web 229336.  $855.24 

Quantity   for 
SBS Series Combi DHW & Hydronic Tanks