Click To Enlarge
Stiebel Eltron Combi, WPL 17 AS Single & WPL 25 AS/AC Single and Three Phase Hydronic / Domestic HW Heat Pump Kits
AVAILABLE NOW, PRICES LISTED BELOW ARE ALREADY DISCOUNTED TO 10% OFF (TRADE PRICE) FOR LIMITED PRODUCT LAUNCH PERIOD
This state of the art product comes in packages that provide a combination of Hydronic Heating for the cooler times of the year for Radiator or in Slab Floor Coil Heating and Domestic Hot Water all year round.
Pictured above the WPL 25 AC/AS 14kW Heat Pump & 200 Litre Combi Tank HSBC 200 S UK
WPL 25/ HSBC Single Phase Kit Model WPL 25 ACS
236643 1 Air|Water heat pump WPL 25 ACS
WPL 25/ HSBC Three Phase Kit Model WPL 25 AC
Qty Product Price
236645 1 Air|Water heat pump WPL 25 AC
236683 1 HSBC 200 GB
233623 1 Connection kit AS-WP
220193 1 Remote control FEK 125
229336 1 Internet-Service Gateway ISG web
165341 2 Contact sensor AVF 6 28
233711 1 Safety temperature controller STB-FB
OPTIONS IF REQUIRED
OptionsModel Qty Product Price
234648 1 Pump assembly mixer circuit for HSBC second zone (Floor Coil)
230013 1 Heating descaler HZEA for poor quality Water
Operation and Installation Guide
Pictured above the WPL 17 ACS 8.5kW Heat Pump
Operation and Installation Guide
APPLICATION: Inverter air / water heat pump with output-dependent control, designed as a compact mono block appliance for outdoor installation. Can be used for heating and DHW operation; also provides efficient cooling via circuit reversal. Ideally uited for use in new builds or buildings with a low system temperature. Sold in perfectly matched sets with compact indoor units for straightforward, space saving installation.
EQUIPMENT/CONVENIENCE: Optimum noise eduction due to encapsulated refrigerant circuit and acoustically isolated compressor. With integral heat and electricity metering via refrigerant circuit data.
EFFICIENCY: The waste heat from the inverter is used to raise the return temperature.
This increases the overall efficiency of the system. Demand-dependent and energy efficient efrosting by reversing the circuit.
INSTALLATION: Accessories for effective condensate drainage are available for
Installation and Detailed Product Data Go Here,
Pictured above the HSBC 200 Litre Combi Tank (Needs to be Installed Indoors)
1. How does a hydronic heat pump work to heat my home?
Air source heat pumps use a refrigeration circuit to harvest energy from the air. This energy is then used to heat the water which is pumped through a hydronic heating circuit, such as in-slab piping or radiators, to warm your home.
2. How noisy is a hydronic heat pump?
Hydronic heat pumps from STIEBEL ELTRON are the quietest on the market thanks to an encapsulated refrigerant circuit and acoustically isolated compressor. Advanced sound engineering guarantees that heat pumps from STIEBEL ELTRON can be used in neighbourhoods with a dense population. Many models even feature an additional silent mode.
3. Can a hydronic heat pump system still heat my home when it is cold outside?
Yes, hydronic heat pumps from STIEBEL ELTRON are engineered to operate energy efficiently even when outside temperatures fall below zero. Advanced technology from Germany ensures efficiency even at cold temperatures down to -20°C. For instance, the natural defrost function of the WPL 25 AC(S) comes into play in temperatures around 0°C to ensure a smooth and efficient operation when it becomes frosty in Australian winter.
4. Can I use hydronic radiators with this heat pump?
Yes, STIEBEL ELTON offers a wide range of hydronic heat pumps which serve as heat source for either under floor heating or radiator heating, or both. This depends on the models’ flow temperatures. Please consult with a STIEBEL expert to identify the right system for your needs.
5. You can purchase a STIEBEL ELTRON hydronic heating heat pump from the ENTER SHOP
STIEBEL ELTRON is working closely with hydronic heating specialist ENTER ENERGY & WATER and these units can be supplied throughout Australia. Feel free to get in touch and ask for a local recommended installer to project manage your installation.
6. Do I need three phase power to operate a hydronic heating heat pump?
STIEBEL ELTRON offers both single and three phase models. The letter “S” in the model description stands for single phase, such as the WPL 25 ACS. Please also check the technical details on the product page of your model or contact STIEBEL ELTRON for further advice.
7. Can I control my hydronic heating heat pump from my mobile device?
All STIEBEL ELTRON heat pumps in Australia are offered with an optional ISG web, which allows you to control and monitor your heating system via a home network or mobile device.
NOTE THIS PRODUCT WILL NEED TO BE ORDERED 12-16 WEEKS before REQUIRED as it is an overseas ORDER and we will require a 10% deposit
PRICES LAST UPDATED 30/1/19