Filmglaze DIY Double Glazing

Easyfix Filmglaze Double Glazing Film is a cost effective way of double glazing, using a thin heat-shrinkable clear film. It's an ideal way to insulate a window either temporarily or permanantly without the cost of obtaining and installing glass or rigid plastic double glazing.

The primary objective in any double glazing system is to trap a layer of still air between two surfaces which provides the insulation barrier. A still air gap of 20mm is the optimum distance for this purpose. Condensation can occur in any secondary glazing sysyem and to reduce the of this it is recommended that filmglaze be applied at the coolest part of the day.

Filmglaze can be punctured very easily. We recommend that you quickly repair any punctures with a small piece of sticky tape to maintain a proper insulation barrier.
In the event of an emergency filmglaze can be easily and quickly be removed to enable access through the window.

Flimglaze comes in three different pack sizes, small, medium and large. All packs include double sided tape & fitting instructions. Tools required for installation are a sharp knife & a hairdryer.

Contents

Small Pack

1x sheet of filmglaze (150cm x 120cm)

1x roll of double sided tape (8m)

Medium Pack OUT OF STOCK

1x sheet of filmglaze (150cm x 300cm)

1x roll of double sided tape (24m)

Large Pack  OUT OF STOCK

1x sheet of filmglaze (150cm x 600cm)

1x roll of double sided tape (24m)