Foilboard Wall, Ceiling  & Conc. Slab Insulation Trade Prices 
Click To Enlarge

 

Foilboard Wall, Ceiling & Conc. Slab Insulation "Trade Prices"

FB2

  Trade Discount

Foilboard® Insulation Panel is a rigid sheet manufactured from fire-retardant expanded polystyrene with pure aluminium foil laminated to both sides. It is slimline and fits easily into any cavity. There is no building paper used in its manufacture, it is impervious to moisture and will not delaminate.

Foilboard® is lightweight, safe to handle and easy to install and, because it contains no hazardous fibres, no protective clothing is required. Foilboard® also achieves extremely high acoustic ratings in walls. The most common applications are walls, brick veneer, double brick and precast concrete. Foilboard® is also used extensively under timber floors, in cathedral ceilings, factory roofs and sheds and for insulating structural Slabs for floor coil in screed and polished concrete (use min 15mm for Slab Insulation).

FB

METHOD OF CALCULATING QUANTITIES OF FOILBOARD

1. Measure Floor or Wall area.

2. Add 5% to area to allow for cutting and waste, deduct window and door openings.

3. If using 2.44m sheets divide the area by 2.93 to give the number of sheets required.

    If using 2.70m sheets divide the area by 3.24 to give the number of sheets required.

4. Round up to the next full sheet.

5. Floor saddles should be on joists at approx 600mm centres and spaced at 200mm from sheet ends.

6. For retro-fits Foilboard should span across the underside of joists and between bearers using three fastners per joist. Joins do not need to be made on a joist and you should tape all joins.

7. Generally 1 bag of saddles is required for every 45-50m2 and 1 Role of Green Tape will be required for every 100m2. For retro-fits you will generally require 1 bag of Fastners and 1 roll of Green Tape for every 15-20 sheets, for Aluminium tape you will require one roll for every 10-12  sheets approx. Flexifastners should be used for all sheets 25mm or thicker and you will require 1 bag of 200 fastners for every 15-20 sheets. Or for sheets over 25mm in thickness you can order the plastic plates and supply your own fixing nails or screws. Spacers for brick work you will require 8-10 spacers per m2

Flexifast Fastener Installation

Flexifast Fastener Installation Instructions


1. Push the Flexifast® fastener into the desired position in your Foilboard® sheet, using the specially
    designed prongs, and then position the board where it is required.
2. Fasten the Flexifast® fastener with either nails or screws where appropriate.
3. Foilboard® recommends the use of 1 Flexifast® fastener every 600mm for maximum stability.
4. To finish the perfect installation of Foilboard®, all sheets must be taped where they
    join to prevent air infiltration, therefore maintaining your desired R-Value.

Instructions are a guideline only and should be interpreted with consideration for the specific building application. Safe installation practices are encouraged at all times. Please contact Foilboard Australia Pty Ltd for further information.

 ALL PRICES FOR OTHER STATES DEPENDANT ON VOLUME AND SHIPPING CONTACT US FORMORE INFO.

ALL PRICES LISTED ARE AT TRADE PRICES FOR VICTORIA, WE CAN DELIVER TO ALL Australian States,   PRICE ON APPLICATION FOR OTHER ) INTERSTATE ORDERS CAN BE PICKED UP AT VIC PRICES IF YOU ARRANGE YOUR OWN TRANSPORT TO PICK UP FROM THE VICTORIAN WAREHOUSE..

NOTE The 40mm and 50mm Foilboard is custom made to order and takes 5 working days payment in full is required when ordering this procuct it also has a Higher standard delivery fee due to its bulk.


Download Brochure PDF: download

PDF: download

FBW

Go here and click on the link below to create an order

Foilboard Floor, Wall & Ceiling Insulation "Also at Trade Prices"

from $0.00

More Info

 

PDF: download

You are not allowed to see prices.