Click To Enlarge
WaterMAXX Storm Water / Tank Fill System
These are the best we have seen around, a complete automated stormwater catchment system.
Simply position the catchment tank in a location that allows you to plumb your stormwater drain into the catchment tank, run a supply feeder line from the pump in the catchment tank to your storage tank which could be for example a 10,000 litre tank hidden away up in the back yard behind a shed and every time it rains you catch every drop that flows down off your roofs into the storm water, when the storage tank is full the controller will not allow the pump to turn on and your stormwater simply flows out to the stormwater system in the street.
A simple above or below ground system.
WaterMAXX Stormwater/Tank Fill KIT 450 Litre or 200litre Pits with pre-plumbed Pump, Controller and Float Switch.
Automatic "Tank Fill" pump Inhibitor.
"Tank Fill" indicator light.
Low voltage Float Switch circuitry.
Weatherproof polycarbonate enclosure.
"Quick Plug" power float switch and pump connections.
Pump pre-plumbed- ready for installation. Model DHS750 See Specifications of pump DHS Series
STF 450, 450 litre pump well-1200mm Diameter x 1175 High.
STF 200, 200 litre pump well-665mm Diameter x 1170 High.