GWS Pressure Wave Energy Saving Series 
Click To Enlarge

 

GWS Pressure Wave Energy Saving Series

    Trade Discount

                          PRODUCT OF THE MONTH

THIS PRODUCT IS A MUST FOR ALL TANK TO TIOLET / L'DRY SYSTEMS AND HOMES WITH NO MAINS WATER SUPPLY, (The bigger the pressure tank the more you will save) 

Conventional electronic household water pressure systems do not have water pressure storage tanks which means that they will start immediately when the pressure drops below 150kPa.

This means that regardless of the amount of water you use, from a dripping tap to a cup of water the pump will start every time until you fix the leak or turn the tap off, then the pump will run for 10 seconds before turning off.

Flushing the toilets, dripping taps, drip irrigation, roof top evaporative coolers, leaking taps, hot water systems all cause pumps to short cycle reducing pump life and using excessive amounts of electricity.

The GWS Energy Saver (18-20 Litre Models) stores approximately 8 litres of water depending on pump pressure which dramatically reduces pump starts, i.e.: you can turn the tap on 20 times to fill 20 cups of water and the pump will not start.

• Quick and easy installation

• Kit comprises of an electronic control, 20 litre tank (see 20H model below), hose connection, thread

tape and installation instructions (pump sold separately)

• Saves power costs

Wall Mount 

The 2V, 8V & 18V (2,8 & 18 Litres 25mm connections @ up to 10 bar pressure)                Tank with Wall Bracket & RAWL Plugs (ideal for submersable pumps)

18 VB

The 18 VB (18 Litres @ up to 10 bar pressure) Floor Mount Plastic base with 180 degree plumbing slots & 700MFECKIT Hose Kit inc Thread Tape and 3WT ( kit as per picture for 20H below.) ideal for above ground pumps

20 H

The 20 H (20 litres @ up to 10 bar pressure) contains 1 x FLE-PWS20H & 700 MFECKIT Hose Kit inc Thread Tape and 3WT ( ideal for above ground pumps).

 

This is an add on kit that can be installed with any Electronic Pump and Controller, it is a base mount pressure tank kit that will enhance any PC type pump with the best features of a pressure pump. As a base mount kit the PC pump is mounted n top of the ENERGYSAVER and is simple to install. The kit is pre-charged with 130kpa of air and there is no requirement to modify or check the charge. there is no maintenance required on the unit. There is considerable potential for this unit to save energy and extend the pump life. Special Features . Substantially reduces electric power consumption by reducingsmall draw off pumps starts i.e. evaporative coolers, toilet flushes, leaks drip irrigation etc . Extends pump life by dramatically reducing wear on moving parts . Protects against heat expansion damage to pump bodies . Reduces noise from unnecessary pump starts . Eliminates motor burn outs and low flow cycling . No Maintenance. Does not require regular air charge checks . 5 Year warranty for guaranteed reliability . Supplied with easy to follow installation instructions . Eliminates pump body failures due to water hammer . Stops water leaking from hot water eliminating termite risk . Includes connection PUMPS SOLD SEPARATELY Buy the GWS ENERGYSAVER and help save the world.

SAVES ON YOUR HOT WATER BILL 

• Saves water and energy otherwise

wasted from heat expansion

• 1 litre per night per house, 4 million

houses, 4 million litres of hot water

and energy wasted every night

• Extends component life by dramatically

reducing water hammer

• Prevents hot water expansion leaks

that can cause termite infestation

and property damage

GWS Install

OTHER LARGER AND COMMERCIAL PRODUCTS AVAILABLE SEE PDF (PRICE ON APPLICATION)

PDF: download
Price (each):
FLE-ENERGYSAVER2V 2V Tank plus wall bracket.  $104.00 
FLE-ENERGYSAVER8V 8V Tank plus wall bracket.  $148.00 
FLE-ENERGYSAVER18V 18V Tank plus wall bracket.  $172.00 
FLE-ENERGYSAVER18VB 18V Tank plus base, hose kit and 3WT.  $347.00 
FLE-ENERGYSAVER20H 20H Tank plus hose kit and 3WT.  $347.00 

Quantity   for 
GWS Engery Saving Series